As a renowned firm, we are involved in manufacturing and supplying a wide assortment of welded mesh, industrial wire products, welded wire products and other wire products. Our assortment includes welded wire mesh, mild steelwire, chain link fencing, barbed wire and galvanized wire. Our wire products are well acclaimed for their attributes of high tensile strength, corrosion
resistance and many others. These are widely demanded in various industries including construction and many others. Our range comprises of:
Welded Wire Mesh
Our range of welded wire mesh is
supreme in quality, which is produced conforming to IS: 1566-1982 with
long and cross wire spacing varying from 25 mm to 150 mm with 2 mm to 6 mm
wire diameter. The intersections are rigidly welded and each of them has
the capacity to withstand the shear stress up to 210 N\mm2 (IS: 4948-1974)
on the reference area of the longitudinal wire. Our range is widely used
in RCC-building construction. It gives good reinforcement solution for
industrialized concrete constructions. Following are the advantages of the
welded wire mesh:
Higher Characteristic Design
Strength:
The welded wire mesh has a better characteristic
strength point of view, usage of welded mesh with Fe480 grade results in
savings in steel area or steel weight required to the tune of 13.55%
vis-à-vis HYSD bars of Fe 415 grade and to the tune of 47.92 % vis-à-vis
plain mild steel bars of Fe 250 grade.
Better Bonding
Behavior:
The bonding capacity of welded mesh is excellent. As
against the peripheral surface area which is responsible for bonding to
concrete in the case of individual bars, the rigid mechanical
interconnections by means of welds to cross wires are mainly responsible
for stress transfer from concrete to steel and vice-versa in the case of
welded mesh.
Better and Economic Crack Resistance with Thinner
Wires and Closer Spacing:
The welds have a strong mechanical
anchorage behavior at each the intersections are further responsible in
imparting an immense deal of homogeneity to the R.C.C section as a whole.
The two dimensional uniform stress distribution of the welded mesh with
the concrete achieves better plate behavior in the slab. Further, welded
mesh usage affords the possibility of using thinner wires at closer
spacing. The close spacing of thinner wires and the two-way behavior of
welded mesh minimizes the crack widths and preserves structural integrity
of the slab.
Load stresses in the residential slabs are low but
where minimum thicknesses of 75 to 125mm are used from serviceability or
other reliability criteria. Following are some of the specifications of
our assortment:
Slab Depth in mm
Min steel. Reqd.@ 0.12% sq.mm/m
HYSD Steel provided at 3 x eff.depth max.
spacing
Welded Wire Steel Welded mesh Close
spacing
% Savings of steel
75
90
Y8 @ 165c/c= 303mm2/m
125 xl25-4mm dia = 100mm2/m
67.00%
100
120
YS@240c/c= 209mm2/m
100xl00-4mm dia = 125mm2/m
40.00%
125
150
Y8@310c/c= 162mm2/m
100x100-4.4mm dia = 152mm2/m
6.20%
Savings of Labor,Time and Binding Wire:
This consumption saved works out to
about 2 to 5% of the reinforcement used in terms of cost of steel saved.
Besides, the added benefit is avoidance of those dangling ends of binding
wire which are the starting fuses for the virus of corrosion into the
reinforcement.
